Оформление форума

[RiantHoff]

Максимальное разрешение экрана у меня 1920х1200

Под это разрешение нужен монитор 26 дюймов.

[a_glow]

Под это разрешение нужен монитор 26 дюймов.

И что? Ты запрещаешь мне такой иметь?
У меня 24" и тоже показывает...

Это флуд уже пошёл

[Хозяин леса]

Кто-нибудь есть на форуме лично знакомый с Хозяином леса?
Пора бы уже "ёлку выбросить". Или мая будем ждать?

Убрали ))

Прошу расширить шапку форума, чтобы при открытии браузера на весь экран не получалась такая картина:

Сделали.
Теперь центр полноценная текстура.

[Хозяин леса]

Можно добавить смайл для подцензурных слов?
Типа такого -

Добавили.

[a_glow]

Хозяин леса
Cпасибо, сверху стало нормально, а вот сбоков... внешняя серая окантовка не совсем в порядке...
Но это уже придирки

[a_glow]

А вот это уже не придирки:
http://validator.w3.org/#validate_by_uri

Markup Validation Service

Check the markup (HTML, XHTML, …) of Web documents
Jump To: Validation Output
Errors found while checking this document as XHTML 1.0 Strict!Result: 20 Errors
File:

Use the file selection box above if you wish to re-validate the uploaded file viewtopic.htm
Encoding: utf-8
Doctype: XHTML 1.0 Strict
Root Element: html
Root Namespace: http://www.w3.org/1999/xhtml

The W3C validators rely on community support for hosting and development.
Donate and help us build better tools for a better web.
OptionsShow Source Show Outline List Messages Sequentially Group Error Messages by Type
Validate error pages Verbose Output Clean up Markup with HTML Tidy

Help on the options is available.

↑ Top
Validation Output: 20 Errors
.....

Возможно, эти ошибки и объясняют некоторые странности форматирования во всех браузерах и скачки на поле быстрого ответа в IE.

ЗЫ Справедливости ради: на www.surnet.ru ошибок в 5 раз больше

[Хозяин леса]

А вот это уже не придирки:
http://validator.w3.org/#validate_by_uri

Хм, а нам говорит "This document was successfully checked as XHTML 1.0 Strict!" ...
(http://validator.w3.org/check?uri=http%3A%2F%2Fforum.sugomak.ru%2F&charset=(detect+automatically)&doctype=Inline&group=0&No200=1
и http://validator.w3.org/check?uri=http%3A%2F%2Fforum.sugomak.ru%2Fviewtopic.php%3Ff%3D2%26t%3D239%26p%3D23610%23p23610&charset=(detect+automatically)&doctype=Inline&group=0&user-agent=W3C_Validator%2F1.654)

мы чего-то забыли?

[msshveikin]

"This document was successfully checked as XHTML 1.0 Strict!"

У меня такое же сообщение выдало.

[a_glow]

Хмм... Значит Opera как то по-другому проверяет.

Код: Выделить всё

Validation Output: 20 Errors
 Line 77, Column 15: the name and VI delimiter can be omitted from an attribute specification only if SHORTTAG YES is specified
<script defer type="text/javascript" src="./styles/style_of_sugomak2/theme/pngfi

"VI delimiter" is a technical term for the equal sign. This error message means that the name of an attribute and the equal sign cannot be omitted when specifying an attribute. A common cause for this error message is the use of "Attribute Minimization" in document types where it is not allowed, in XHTML for instance.

How to fix: For attributes such as compact, checked or selected, do not write e.g <option selected ... but rather <option selected="selected" ...
 Line 92, Column 37: document type does not allow element "a" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
<a id="top" name="top" accesskey="t"></a>

✉

The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.

One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
 Line 94, Column 28: Attribute "height" exists, but can not be used for this element.
<table width="100%" height="100%" border="0" cellspacing="0" cellpadding="0">

✉

You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
 Line 112, Column 34: Attribute "width" exists, but can not be used for this element.
                     <td valign="bottom" width="35%">

✉

You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
 Line 117, Column 45: Attribute "height" exists, but can not be used for this element.
               <td valign="bottom" width="114" height="10">

✉

You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
 Line 157, Column 111: required attribute "alt" not specified
…trans.png" width="29" height="117" /></td>

✉

The attribute given above is required for an element that you've used, but you have omitted it. For instance, in most HTML and XHTML document types the "type" attribute is required on the "script" element and the "alt" attribute is required for the "img" element.

Typical values for type are type="text/css" for <style> and type="text/javascript" for <script>.
 Line 164, Column 44: value of attribute "valign" cannot be "center"; must be one of "top", "middle", "bottom", "baseline"
                  <tr><td align="center" valign="center">

✉

The value of the attribute is defined to be one of a list of possible values but in the document it contained something that is not allowed for that type of attribute. For instance, the “selected” attribute must be either minimized as “selected” or spelled out in full as “selected="selected"”; a value like “selected="true"” is not allowed.
 Line 193, Column 22: value of attribute "valign" cannot be "center"; must be one of "top", "middle", "bottom", "baseline"
         <td valign="center" height="100%" class="mtable_content" style="background-im

✉

The value of the attribute is defined to be one of a list of possible values but in the document it contained something that is not allowed for that type of attribute. For instance, the “selected” attribute must be either minimized as “selected” or spelled out in full as “selected="selected"”; a value like “selected="true"” is not allowed.
 Line 635, Column 168: Attribute "name" exists, but can not be used for this element.
…bmit="return checkForm(this);" name="postform" enctype="multipart/form-data">

✉

You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
 Line 810, Column 65: document type does not allow element "input" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
…="hidden" name="creation_time" value="1238655304" />

✉

The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.

One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
 Line 811, Column 90: document type does not allow element "input" here; missing one of "p", "h1", "h2", "h3", "h4", "h5", "h6", "div", "pre", "address", "fieldset", "ins", "del" start-tag
…0edc50dfadd60e4485fb7ff1656a6d971" />

✉

The mentioned element is not allowed to appear in the context in which you've placed it; the other mentioned elements are the only ones that are both allowed there and can contain the element mentioned. This might mean that you need a containing element, or possibly that you've forgotten to close a previous element.

One possible cause for this message is that you have attempted to put a block-level element (such as "<p>" or "<table>") inside an inline element (such as "<a>", "<span>", or "<font>").
 Line 907, Column 15: Attribute "align" exists, but can not be used for this element.
               <p align="center"><span class="copyright"><br /></span></p>

✉

You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
 Line 915, Column 44: value of attribute "valign" cannot be "center"; must be one of "top", "middle", "bottom", "baseline"
                  <tr><td align="center" valign="center">

✉

The value of the attribute is defined to be one of a list of possible values but in the document it contained something that is not allowed for that type of attribute. For instance, the “selected” attribute must be either minimized as “selected” or spelled out in full as “selected="selected"”; a value like “selected="true"” is not allowed.
 Line 984, Column 38: Attribute "align" exists, but can not be used for this element.
                        <div class="copyright" align="center" style="margin-top:10px; color:#999

✉

You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
 Line 997, Column 52: Attribute "target" exists, but can not be used for this element.
…href="http://www.phpbb.com/" target="_blank" class="copyright">рhрBВ</a> &cop

✉

You have used the attribute named above in your document, but the document type you are using does not support that attribute for this element. This error is often caused by incorrect use of the "Strict" document type with a document that uses frames (e.g. you must use the "Transitional" document type to get the "target" attribute), or by using vendor proprietary extensions such as "marginheight" (this is usually fixed by using CSS to achieve the desired effect instead).

This error may also result if the element itself is not supported in the document type you are using, as an undefined element will have no supported attributes; in this case, see the element-undefined error message for further information.

How to fix: check the spelling and case of the element and attribute, (Remember XHTML is all lower-case) and/or check that they are both allowed in the chosen document type, and/or use CSS instead of this attribute. If you received this error when using the <embed> element to incorporate flash media in a Web page, see the FAQ item on valid flash.
 Line 77, Column 14: XML Parsing Error: Specification mandate value for attribute defer
<script defer type="text/javascript" src="./styles/style_of_sugomak2/theme/pngfi

✉
 Line 77, Column 14: XML Parsing Error: attributes construct error
<script defer type="text/javascript" src="./styles/style_of_sugomak2/theme/pngfi

✉
 Line 77, Column 14: XML Parsing Error: Couldn't find end of Start Tag script line 77
<script defer type="text/javascript" src="./styles/style_of_sugomak2/theme/pngfi

✉
 Line 77, Column > 80: XML Parsing Error: Opening and ending tag mismatch: head line 3 and script
…/styles/style_of_sugomak2/theme/pngfix.js"></script>…

✉
 Line 87, Column 7: XML Parsing Error: Opening and ending tag mismatch: html line 2 and head
</head>

✉



[msshveikin]

Значит Opera как то по-другому проверяет.

Версия: 9.62
Сборка: 10467
Платформа: Win32
Система: Windows XP
Версия Java: Sun Java Runtime Environment version 1.6
Модуль XHTML+Voice: Плагин не загружен

[a_glow]

Информация о версии
Версия 9.64
Сборка 10487
Платформа Win32
Система Windows XP
Java Java не установлена
XHTML+голос Плагин не загружен

Идентификация браузера
Opera/9.64 (Windows NT 5.1; U; ru) Presto/2.1.1

Я говорил о проверке через контекстное меню, пункт "Проверить Ctrl+Alt+Shift+U"

[Хозяин леса]

a_glow
Спасибо, посмотрим.

[RiantHoff]

В стиле 'prosilver' на главной странице форума нет ссылки на правила форума, в нашем случае называемым 'Уставная грамота'.

[RiantHoff]

Предыдущее сообщение так и оставлено без внимания.
Чего я и опасался давно. Дефолтная тема будет заброшена, а обновляться и отслеживаться будет только сугомакская тема (стиль) форума .

[RiantHoff]

Проблема с форумом с сегодняшнего утра (вроде не раньше).
Вот как выглядит заглавная страница.
Изображение кликабельно.


Ctrl-R нажимал, если что.